Dell MX9116n EMC SmartFabric OS10 User Guide - Page 622

Usage Information The no version of this command deletes a stub area. Example OS10(config)# router ospf 10 OS10(conf-router-ospf-10)# area 10.10.1.5 stub Supported Releases 10.2.0E or later auto-cost reference-bandwidth Calculates default metrics for the interface based on the configured auto-cost reference bandwidth value. Syntax auto-cost reference-bandwidth value Parameters value - Enter the reference bandwidth value to calculate the OSPF interface cost in megabits per second, from 1 to 4294967. Default 100000 Command Mode ROUTER-OSPF Usage Information The value set by the ip ospf cost command in INTERFACE mode overrides the cost resulting from the auto-cost command. The no version of this command resets the value to the default. Example OS10(config)# router ospf 10 OS10(conf-router-ospf-10)# auto-cost reference-bandwidth 150 Supported Releases 10.2.0E or later clear ip ospf process Clears all OSPF routing tables. Syntax Parameters clear ip ospf {instance-number} [vrf vrf-name] process • instance-number - Enter an OSPF instance number, from 1 to 65535. • vrf vrf-name - Enter the keyword vrf followed by the name of the VRF to reset the OSPF process configured in that VRF. Default Not configured Command Mode EXEC Usage Information This command clears all entries in the OSPF routing table. Example OS10# clear ip ospf 3 vrf vrf-test process Supported Releases 10.2.0E or later clear ip ospf statistics Clears OSPF traffic statistics. Syntax Parameters clear ip ospf [instance-number] [vrf vrf-name] statistics • instance-number - (Optional) Enter an OSPF instance number, from 1 to 65535. • vrf vrf-name - (Optional) Enter the keyword vrf followed by the name of the VRF to clear OSPF traffic statistics in that configured VRF. Default Not configured Command Mode EXEC Usage Information This command clears the OSPF traffic statistics in a specified instance or in all the configured OSPF instances, and resets them to zero. 622 Layer 3