Dell MX9116n EMC SmartFabric OS10 User Guide - Page 150

snmp-server view Configures an SNMPv3 view. Syntax Parameters snmp-server view view-name oid-tree [included | excluded] • view-name - Enter the name of a read-only, read-write, or notify view. A maximum of 32 characters. • oid-tree - Enter the SNMP object ID at which the view starts in 12-octet dotted-decimal format. • included - (Optional) Include the MIB family in the view. • excluded - (Optional) Exclude the MIB family from the view. Defaults Not configured Command Mode CONFIGURATION Usage Information The oid-tree value specifies the OID in the MIB tree hierarchy at which a view starts. Enter included or excluded to include or exclude the remaining part of the MIB sub-tree contents in the view. Supported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.2.0. Also supported in SmartFabric mode starting in release 10.5.0.1. The no version of the command removes an SNMPv3 view. Example OS10(config)# snmp-server view readview 1.3.6.5 excluded Supported Releases 10.4.2.0 or later snmp-server vrf Configures an SNMP agent to receive SNMP traps for the management VRF instance. Syntax snmp-server vrf management Parameters None Defaults Not configured Command Mode CONFIGURATION Usage Information The no version of this command disables the SNMP agent from receiving the SNMP traps. Example OS10(config)# snmp-server vrf management Supported Releases 10.4.1.0 or later Example: Configure SNMP This example shows how to configure SNMP on the switch, including SNMP engine ID, views, groups, and users. OS10(config)# snmp-server contact "Contact Support" OS10(config)# snmp-server engineID remote 192.168.1.2 udp-port 502 0xdefa OS10(config)# snmp-server engineID local test OS10(config)# snmp-server group sngroup 2c notify notofy_view OS10(config)# snmp-server group snv3group 3 noauth read read_view OS10(config)# snmp-server user snuser sngroup 3 auth sha a2FubmFuX3Rlc3Q= OS10(config)# snmp-server view readview 1.3.6.1.2.1.2.2 included OS10(config)# snmp-server view snview .1 excluded OS10(config)# do show snmp engineID local Local default SNMP engineID: 0x800002a20474657374 OS10(config)# do show snmp engineID remote Remote Engine ID IP-addr Port 0xdefa 192.168.1.2 502 OS10(config)# do show snmp group groupname : sngroup 150 System management