Dell MX9116n EMC SmartFabric OS10 User Guide - Page 1146

• yellow - (Optional) Enter to mark the packets to deliver to the egress queue. Default Not configured Command Mode POLICY-MAP-CLASS-MAP Usage Information This command supports only QoS ingress policy type. Packets marked as color yellow deliver to the egress queue, then the egress queue transmits the packets with the available bandwidth. If bandwidth is not available, the packets drop. All packets marked as color red drop. When class-map type is qos, the qos-group corresponds to data queues 0 to 7. Example OS10(conf-pmap-c-qos)# set dscp 10 Supported Releases 10.2.0E or later set qos-group Configures marking for the QoS-group queues. Syntax set qos-group queue-number Parameters queue-number - Enter a queue number, from 0 to 7. Default Not configured Command Mode POLICY-MAP-CLASS-MAP Usage Information This command supports only the qos or control-plane ingress policy type. When the class-map type is control-plane, the qos-group corresponds to CPU queues 0 to 11. When the class-map type is qos, the qosgroup corresponds to data queues 0 to 7. Example OS10(conf-pmap-c-qos)# set qos-group 7 Supported Releases 10.2.0E or later shape Shapes the outgoing traffic rate. Syntax Parameters shape {min {kbps | mbps | pps} min-value [burst-size]} {max {kbps | mbps | pps} max-value [max-burst-size]} • min - Enter the minimum committed rate in unit in kbps, mbps, or pps. • kbps - Enter the committed rate unit in kilobits per second, from 0 to 40000000. • mbps - Enter the committed rate unit in megabits per second, from 0 to 40000. • pps - Enter the committed rate unit in packets per second, from 1 to 268000000. • burst-size - Enter the burst size in kilobytes per packet, from 0 to 10000 or 1 to 1073000. • max - Enter the maximum peak rate in kbps, mbps, or pps. • max-burst-size - Enter the burst size in kilobytes per packets, from 0 to 10000 or 1 to 1073000. Default Maximum burst size is 50 kb or 200 packets Command Mode POLICY-MAP-CLASS-MAP Usage Information This command only supports the ingress QoS policy type. You must enter both the minimum and maximum values. If you enter the rate value in pps, the burst provided is in packets. If you enter the rate in kbps or mbps, the burst is provided in kb. If you enter the minimum rate in pps, you must also enter the maximum rate in pps. Example OS10(conf-pmap-c-que)# shape min kbps 11 max kbps 44 1146 Quality of service