Dell PowerEdge 2950 Hardware Owner's Manual (PDF) - Page 108
Installing the System Board
View all Dell PowerEdge 2950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Figure 3-36. System Board Removal 1 2 3 4 1 system-board tray 4 system-board securing tabs 2 system-board tray riser release pin 3 system board Installing the System Board CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. See your Product Information Guide for complete information about safety precautions, working inside the computer, and protecting against electrostatic discharge. 1 Lower the system-board tray until the tray sits flat on the bottom of the chassis. 2 Ensure that all 17 system-board securing tabs are fully inserted into the 17 system-board securing slots. See Figure 3-36. 3 Slide the system-board tray toward the back of the chassis until it locks into position. 4 Replace the SAS backplane. See "Installing the SAS Backplane Board" on page 104. 108 Installing System Components