Dell PowerEdge 2950 Hardware Owner's Manual (PDF) - Page 82
Installing the Optical Drive
View all Dell PowerEdge 2950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Figure 3-21. Removing and Installing the Optical Drive Tray 1 2 3 4 1 optical-drive cable 4 optical drive 2 optical-drive release tab 3 optical -drive tray Installing the Optical Drive 1 Align the optical drive tray with its opening in the front panel. The optical drive opening is above the hard-drive slots on the far right, or the flex bay, depending on your system's drive configuration (the hard-drives slots are identified by labels on the front panel of the system). 2 Slide in the drive tray until the tray snaps into place. See Figure 3-21. 3 Connect the optical drive cable to the connector on the back of the drive. 4 Close the system. See "Closing the System" on page 55. 5 Replace the bezel. See "Replacing the Front Bezel" on page 54. 6 Reconnect your system and peripherals to their electrical outlets, and turn on the system. 82 Installing System Components