Dell PowerEdge 2950 Hardware Owner's Manual (PDF) - Page 59
Installing a SAS Hard Drive Into a SATAu Drive Carrier
View all Dell PowerEdge 2950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Installing a SAS Hard Drive Into a SATAu Drive Carrier NOTE: SAS hard drives must be installed only in SATAu drive carriers. The SATAu drive carrier is labeled "SATAu" and also has marks indicating the SAS and SATA mounting screws. 1 Insert the SAS hard drive into the hard-drive carrier with the connector end of the drive at the rear. See Figure 3-5. 2 Viewing the assembly as shown in Figure 3-5, align the bottom rear screw hole on the hard drive with the hole labeled "SAS" on the hard drive carrier. When aligned correctly, the rear of the hard drive will be flush with the rear of the hard-drive carrier. 3 Attach the four screws to secure the hard drive to the hard-drive carrier. See Figure 3-5. Figure 3-5. Installing a SAS Hard Drive Into a SATAu Drive Carrier 1 2 3 SATAu SAS 1 screws (4) 2 SATAu drive carrier 3 SAS hard drive Installing System Components 59