Dell PowerEdge 2950 Hardware Owner's Manual (PDF) - Page 75
Removing a RAID Battery
View all Dell PowerEdge 2950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Figure 3-17. Installing a RAID Battery 3 4 2 1 1 chassis battery carrier slot (2) 2 battery cable 4 SAS RAID controller daughter card battery 3 battery carrier Removing a RAID Battery 1 Disconnect the cable between the RAID battery and the SAS RAID controller daughter card. See Figure 3-17. 2 Press down and to the left on the battery carrier to disengage the carrier from the chassis battery carrier slots. 3 Gently pulling back the two guides holding the RAID battery into the battery carrier, draw out the RAID battery from the battery carrier. Installing System Components 75
Installing System Components
75
Figure 3-17.
Installing a RAID Battery
Removing a RAID Battery
1
Disconnect the cable between the RAID battery and the SAS RAID controller daughter card. See
Figure 3-17.
2
Press down and to the left on the battery carrier to disengage the carrier from the chassis battery carrier
slots.
3
Gently pulling back the two guides holding the RAID battery into the battery carrier, draw out the
RAID battery from the battery carrier.
1
chassis battery carrier slot (2)
2
battery cable
3
battery carrier
4
SAS RAID controller daughter
card battery
1
3
4
2