Dell PowerEdge 2950 Hardware Owner's Manual (PDF) - Page 68
Fan Brackets, Removing the Fan Bracket - fan control
View all Dell PowerEdge 2950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Fan Brackets Removing the Fan Bracket CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. See your Product Information Guide for complete information about safety precautions, working inside the computer, and protecting against electrostatic discharge. 1 Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. 2 Open the system. See "Opening the System" on page 54. 3 Remove the cooling shroud. See "Removing the Cooling Shroud" on page 67. 4 Remove the SAS controller daughter card. See "Removing a SAS Controller Daughter Card" on page 74 5 Remove the fans from the fan bracket. See "Removing a System Fan" on page 65. 6 Remove the fan bracket from the system: a Press down on the release latch on the left side of the fan bracket. See Figure 3-11. If the bracket does not disengage completely, push down slightly on the bracket when releasing the latch. b Rotate the left side of the bracket upward, releasing the plastic clip from its slot in the power supply cage. c Draw the bracket out of the system. 68 Installing System Components