Dell bpcwcsn_5 User's Guide - Page 120
Attach the power and floppy-drive cables to the floppy drive.
![]() |
View all Dell bpcwcsn_5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
a Use a small flat-edge screw driver on the back side of the drive-panel insert to gently pop off the insert. b Remove the four shoulder screws from the drive-panel insert. 2 If you are replacing an existing drive: Remove the four shoulder screws from the existing drive. 3 Insert the four shoulder screws into the sides of the new floppy drive and tighten them. 4 Attach the power and floppy-drive cables to the floppy drive. 5 Connect the floppy drive cable to the DSKT connector on the system board (see "System Board Components" on page 28 for the connector locations). 6 Align the shoulder screws with the screw guides, and slide the drive into the bay until it clicks into place. Desktop Computer 120
![](/manual_guide/products/dell-optiplex-740-users-guide-19f9f5b/120.png)
Desktop Computer
120
a
Use a small flat-edge screw driver on the back side of the drive-panel insert to gently pop off
the insert.
b
Remove the four shoulder screws from the drive-panel insert.
2
If you are replacing an existing drive:
Remove the four shoulder screws from the existing drive.
3
Insert the four shoulder screws into the sides of the new floppy drive and tighten them.
4
Attach the power and floppy-drive cables to the floppy drive.
5
Connect the floppy drive cable to the DSKT connector on the system board (see "System Board
Components" on page 28 for the connector locations).
6
Align the shoulder screws with the screw guides, and slide the drive into the bay until it clicks into
place.