Dell bpcwcsn_5 User's Guide - Page 153

2 1 3 5 4 7 6 1 PCI Express x16 DVI-card 4 lever 7 PCI Express x16 card connector 2 removal pull tab 5 securing slot 3 DVI card connector 6 securing tab 7 If you are removing the card permanently, install a filler bracket in the empty card-slot opening. NOTE: Installing filler brackets over empty card-slot openings is necessary to maintain FCC certification of the computer. The brackets also keep dust and dirt out of your computer. 8 Before you close the card retention mechanism, ensure that: • The tops of all cards and filler brackets are flush with the alignment bar. • The notch in the top of the card or filler bracket fits around the alignment guide. 9 Secure any remaining card(s) by closing the card retention latch and snapping it into place. NOTICE: Do not route card cables over the cards. Cables routed over the cards can prevent the computer cover from closing properly or cause damage to the equipment. 10 Replace the computer cover (see "Replacing the Computer Cover" on page 297). NOTE: See the documentation for the card for information about the card's cable connections. Desktop Computer 153