Dell bpcwcsn_5 User's Guide - Page 53
Integrated Audio, Onboard Devices, setting
View all Dell bpcwcsn_5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
2 1 3 4 1 fully seated card 2 4 bracket caught outside of slot not fully seated card 3 bracket within slot 5 Connect any cables that should be attached to the card. NOTICE: Do not route card cables over the cards. Cables routed over the cards can prevent the computer cover from closing properly or cause damage to the equipment. 6 Before you close the card retention mechanism, ensure that: • The tops of all cards and filler brackets are flush with the alignment bar. • The notch in the top of the card or filler bracket fits around the alignment guide. 7 Secure the card(s) by closing the card retention latch and snapping it into place. 8 Replace the computer cover (see "Replacing the Computer Cover" on page 297). 9 If you installed a sound card: a Enter system setup, select Integrated Audio from the Onboard Devices group, and change the setting to Off (see "System Setup" on page 257). b Connect external audio devices to the sound card's connectors. Do not connect external audio devices to the line-in connector on the back panel of the computer (see "Back-Panel Connectors" on page 99). NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer. Mini Tower Computer 53