Dell bpcwcsn_5 User's Guide - Page 59
Before you close the card retention mechanism, ensure
![]() |
View all Dell bpcwcsn_5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
2 1 1 card retention latch 2 alignment guide 3 Disconnect the PS/2 serial adapter cable from the system board (see "System Board Components" on page 28). 4 If necessary, disconnect any external cables connected to the adapter. 5 Grasp the PS/2 serial-port adapter bracket by its top corners, and ease it out of its retention slot. 6 If you are removing the adapter permanently, install a filler bracket in the empty card-slot opening. NOTE: Installing filler brackets over empty card-slot openings is necessary to maintain FCC certification of the computer. The brackets also keep dust and dirt out of your computer. 7 Before you close the card retention mechanism, ensure that: • The tops of all cards and filler brackets are flush with the alignment bar. • The notch in the top of the card or filler bracket fits around the alignment guide. 8 Secure the card(s) by closing the card retention latch and snapping it into place. 9 Replace the computer cover (see "Replacing the Computer Cover" on page 297). Mini Tower Computer 59
![](/manual_guide/products/dell-optiplex-740-users-guide-19f9f5b/59.png)