Dell bpcwcsn_5 User's Guide - Page 87
Install the heat sink assembly, Apply the new thermal grease to the top of the processor.
![]() |
View all Dell bpcwcsn_5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
5 Set the processor lightly in the socket and ensure that the processor is positioned correctly. 6 While lightly pressing down on the processor, rotate the release lever back toward the system board until it snaps into place, securing the processor. 7 Clean the thermal grease from the bottom of the heat sink. NOTICE: Ensure that you apply new thermal grease. New thermal grease is critical for ensuring adequate thermal bonding, which is a requirement for optimal processor operation. 8 Apply the new thermal grease to the top of the processor. NOTICE: Ensure that the CPU and audio cables are not routed so that they are pinched when the heat sink assembly is installed. 9 Install the heat sink assembly: a Place the heat sink assembly back onto the heat-sink assembly bracket. b Rotate the heat sink assembly down towards the computer base and ensure that the two captive screws are properly aligned with the holes in the system board. c Tighten the two captive screws. NOTICE: Ensure that the heat sink assembly is correctly seated and secure. Mini Tower Computer 87
![](/manual_guide/products/dell-optiplex-740-users-guide-19f9f5b/87.png)