Dell bpcwcsn_5 User's Guide - Page 160
If you are removing the card permanently, install a filler bracket in the empty card-slot opening.
![]() |
View all Dell bpcwcsn_5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
3 Gently lift the release tab on the card retention latch from the inside to pivot the latch open. Pivot the latch until it snaps into the open position. 4 If necessary, disconnect any cables connected to the card. 5 Press the lever with your thumb until you release the securing tab. 6 While pressing the lever, pull the card up and out of the card connector. 2 3 1 4 5 1 PCI Express x16 card 4 securing tab 2 lever 5 PCI Express x16 card connector 3 securing slot (not all cards) 7 If you are removing the card permanently, install a filler bracket in the empty card-slot opening. NOTE: Installing filler brackets over empty card-slot openings is necessary to maintain FCC certification of the computer. The brackets also keep dust and dirt out of your computer. 8 Before you close the card retention mechanism, ensure that: • The tops of all cards and filler brackets are flush with the alignment bar. • The notch in the top of the card or filler bracket fits around the alignment guide. 9 Secure any remaining card(s) by closing the card retention latch and snapping it into place. Desktop Computer 160
![](/manual_guide/products/dell-optiplex-740-users-guide-19f9f5b/160.png)