Dell bpcwcsn_5 User's Guide - Page 272
Using NVIDIA MediaShield, Clear disk data, Array List, Array Detail, Create, System Tasks
![]() |
View all Dell bpcwcsn_5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 272 highlights
7 After assigning the hard drives to an array, press . The Clear disk data prompt appears. NOTICE: You will lose all data on the selected drives in the next step. 8 Press to clear all data from the selected drives. The Array List window appears. 9 To review the details of the array that you set up, use the arrow keys to highlight the array in the Array Detail window and press . The Array Detail window appears. NOTE: To delete an array, use the arrow keys to select the array and press . 10 Press to return to the previous screen. 11 Press to exit the RAID BIOS. Using NVIDIA MediaShield NVIDIA MediaShield allows you to create, view, and manage RAID configurations. NOTE: Use NVIDIA MediaShield to create a RAID configuration only when you are adding a new hard drive to an existing (non-RAID) single-hard-drive computer, and you want to configure the new drive into a RAID array. Hard drives of any size may be used to create a RAID configuration using NVIDIA MediaShield. Ideally, however, the drives should be of equal size to avoid unallocated or unused space. For an explanation of RAID levels and their requirements, see "About RAID Configurations" on page 268. Creating a RAID Array NOTICE: The following procedure will result in the loss of all data on your hard drive(s). Back up any data you want to keep before continuing. NOTE: Do not use the following procedure to migrate an existing RAID configuration (see "Converting From One RAID Configuration to Another RAID Configuration" on page 273. 1 Enable RAID on your hard drives (see "Setting Your Computer to RAID-Enabled Mode" on page 271). 2 After rebooting your computer, launch NVIDIA MediaShield. 3 Click Create under System Tasks. The NVIDIA Create Array Wizard appears and lists the disks that are available for configuration. 4 Click Next. 5 Click Custom, then click Next. 6 Use the drop-down box to select Striping (RAID 0) or Mirroring (RAID 1). 7 Click Next. The Free Disk Selection window appears. NOTE: Only RAID-enabled hard drives are listed as free disks. 272 Advanced Features
![](/manual_guide/products/dell-optiplex-740-users-guide-19f9f5b/272.png)