Dell bpcwcsn_5 User's Guide - Page 183
Apply the new thermal grease to the top of the processor.
View all Dell bpcwcsn_5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
NOTICE: To avoid damage, ensure that the processor aligns properly with the socket, and do not use excessive force when you install the processor. 5 Set the processor lightly in the socket and ensure that the processor is positioned correctly. 6 While lightly pressing down on the processor, rotate the release lever back toward the system board until it snaps into place, securing the processor. 7 Clean the thermal grease from the bottom of the heat sink. NOTICE: Ensure that you apply new thermal grease. New thermal grease is critical for ensuring adequate thermal bonding, which is a requirement for optimal processor operation. 8 Apply the new thermal grease to the top of the processor. 9 Install the heat sink assembly: a Place the heat sink assembly back onto the heat-sink assembly bracket. b Rotate the heat sink assembly down towards the computer base and ensure that the two captive screws are properly aligned with the holes in the system board. c Tighten the two captive screws. NOTICE: Ensure that the heat sink assembly is correctly seated and secure. 1 2 3 1 heat sink assembly 2 heat-sink assembly bracket 3 captive screw housing (2) 10 Replace the computer cover (see "Replacing the Computer Cover" on page 297). Desktop Computer 183