Dell bpcwcsn_5 User's Guide - Page 44

b Connect the network cable to the network adapter card's connectors. Do not connect the network cable to the integrated network connector on the back panel of the computer. 12 Install any drivers required for the card as described in the card documentation. Removing a PCI Card 1 Follow the procedures in "Before You Begin" on page 19 2 Gently push the release tab on the card retention latch from the inside to pivot the latch open. The latch will remain in the open position. 2 1 3 4 6 5 1 card retention latch 4 card-edge connector 2 alignment guide 5 card connector 3 card 6 release tab 3 If necessary, disconnect any cables connected to the card. 4 Grasp the card by its top corners, and ease it out of its connector. 5 If you are removing the card permanently, install a filler bracket in the empty card-slot opening. NOTE: Installing filler brackets over empty card-slot openings is necessary to maintain FCC certification of the computer. The brackets also keep dust and dirt out of your computer. 6 Before you close the card retention mechanism, ensure that: • The tops of all cards and filler brackets are flush with the alignment bar. 44 Mini Tower Computer