Dell bpcwcsn_5 User's Guide - Page 234
Disconnect the PS/2 serial port cable from the system board see System Board Components
![]() |
View all Dell bpcwcsn_5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 234 highlights
1 2 3 4 5 1 release tab 2 4 serial port adapter connector 5 adapter retention latch 3 serial port adapter system board connector (PS2/SER2) serial port adapter bracket 7 Connect the adapter cable to the PS/2 serial port adapter connector (PS2/SER2) on the system board (see "System Board Components" on page 102). NOTE: See the documentation for the PS/2 serial port adapter for information about the cable connections. 8 Replace the computer cover (see "Replacing the Computer Cover" on page 297). Removing a PS/2 Serial Port Adapter 1 Follow the procedures in "Before You Begin" on page 19. 2 Gently lift the release tab on the card retention latch from the inside and pivot the latch open. 3 Disconnect the PS/2 serial port cable from the system board (see "System Board Components" on page 102). 4 Grasp the PS/2 serial port adapter bracket by its top corners, and ease it out of its connector. 5 If you are removing the adapter permanently, install a filler bracket in the empty card-slot opening. 234 Small Form Factor Computer
![](/manual_guide/products/dell-optiplex-740-users-guide-19f9f5b/234.png)