Dell bpcwcsn_5 User's Guide - Page 169
Replacing the Power Supply, Product Information Guide.
View all Dell bpcwcsn_5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
Power Supply Replacing the Power Supply CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide. NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface on the computer chassis. 1 Follow the procedures in "Before You Begin" on page 19. 2 Disconnect the DC power cables from the system board and the drives. Note the routing of the DC power cables underneath the tabs in the computer chassis as you remove them from the system board and drives. You must route these cables properly when you replace them to prevent their being pinched or crimped. 3 Remove the two screws that attach the power supply to the back of the computer chassis. 4 Remove the optical drive and carefully set it aside (see "Removing an Optical Drive" on page 115). 5 Press the release button located on the floor of the computer chassis. Desktop Computer 169