Dell bpcwcsn_5 User's Guide - Page 77
Installing the Media Card Reader, and attach the screws to the new device.
View all Dell bpcwcsn_5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
2 Remove the drive panel by sliding the drive release latch in the direction indicated on the latch to open the panel. Then remove it from the hinges. 3 Disconnect the media card reader cable from the back of the media card reader. 4 Slide the drive release latch in the direction indicated on the latch until the media card reader is released; while holding the latch open, slide the device out of the computer. 3 2 1 1 media card reader 2 media card reader cable 3 drive release latch Installing the Media Card Reader 1 If you are replacing a media card reader, remove the shoulder screws from the existing device and attach the screws to the replacement device. 2 If you are installing a new media card reader, remove the drive-panel insert (see "Drive-Panel Inserts" on page 70) for your new device, remove the shoulder screws from the inside of the drive-panel insert and attach the screws to the new device. 3 Align the shoulder screws on the media card reader with the shoulder screw slots, and gently slide the device into the bay until it clicks into place. 4 Attach the media card reader cable to the media card reader. Mini Tower Computer 77