Dell bpcwcsn_5 User's Guide - Page 123
Connect the card reader cable to the USB1 connector on the system board see System Board
![]() |
View all Dell bpcwcsn_5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Installing the Media Card Reader 1 If you are installing a new media card reader: a Use a small flat-edge screw driver on the back side of the drive-panel insert to gently pop off the insert. b Remove the four shoulder screws from the drive-panel insert. 2 If you are replacing an existing media card reader: Remove the four shoulder screws from the existing media card reader. 3 Insert the four shoulder screws into the sides of the new media card reader and tighten them. 4 Attach the media card reader cable to the media card reader. 5 Connect the card reader cable to the USB1 connector on the system board (see "System Board Components" on page 102 for the connector location). 6 Align the shoulder screws with the screw guides numbered as 2, and slide the media card reader forward into the bay until it clicks into place. Desktop Computer 123
![](/manual_guide/products/dell-optiplex-740-users-guide-19f9f5b/123.png)