Dell bpcwcsn_5 User's Guide - Page 50
The tops of all cards and filler brackets are flush with the alignment bar.
View all Dell bpcwcsn_5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
2 1 3 4 6 5 1 card retention latch 4 card-edge connector 2 alignment guide 5 card connector 3 card 6 release tab 3 If necessary, disconnect any cables connected to the card. 4 Grasp the card by its top corners, and ease it out of its connector. 5 If you are removing the card permanently, install a filler bracket in the empty card-slot opening. NOTE: Installing filler brackets over empty card-slot openings is necessary to maintain FCC certification of the computer. The brackets also keep dust and dirt out of your computer. 6 Before you close the card retention mechanism, ensure that: • The tops of all cards and filler brackets are flush with the alignment bar. • The notch in the top of the card or filler bracket fits around the alignment guide. 7 Secure the card(s) by closing the card retention latch and snapping it into place. 8 Replace the computer cover (see "Replacing the Computer Cover" on page 297). 50 Mini Tower Computer