Dell bpcwcsn_5 User's Guide - Page 231
Removing a PCI Express x16 Card or DVI Card
View all Dell bpcwcsn_5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 231 highlights
12 If you installed a network adapter card and want to turn off the integrated network adapter: a Enter system setup, select Integrated NIC from the Onboard Devices group, and change the setting to Off (see "System Setup" on page 257). b Connect the network cable to the network adapter card's connectors. Do not connect the network cable to the integrated network connector on the back panel of the computer. 13 Install any drivers required for the card as described in the card documentation. Removing a PCI Express x16 Card or DVI Card 1 Follow the procedures in "Before You Begin" on page 19. 2 Gently lift the release tab on the card retention latch from the inside and pivot the latch open. 3 If necessary, disconnect any cables connected to the card. 4 Press the lever with your thumb until you release the securing tab. If you are removing a PCI Express x16 card, go to step 5. If you are removing a DVI card, go to step 6 5 While pressing the lever, pull the card up and out of the card connector. 2 3 1 4 5 1 PCI Express x16 card 4 securing tab 2 lever 5 PCI Express x16 card connector 3 securing slot (not all cards) 6 While pressing the lever, pull the removal pull tab up and remove the card out of the card connector. Small Form Factor Computer 231