HP Brio ba410 hp brio ba410, user guide - Page 34
There's a Problem with the Floppy Drive
View all HP Brio ba410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Hardware Problems There's a Problem with the Floppy Drive Have you checked that... You are using a formatted diskette and it is inserted correctly Ö How You will receive an on-screen error if the diskette is not properly formatted The floppy is clean Ö Use a diskette cleaning kit (see your PC dealer) The Setup program is correctly configured for your floppy drive The hardware is working properly Ö Ö Enter the Setup program by pressing F2 at startup, then: • Go to the Advanced menu. You should see a hard disk drive declared in the Flexible Disk Drive submenu. Run e-DiagTools to see if it detects a problem with the floppy drive (refer to page 42) Advanced Troubleshooting Have you checked that... The drive's power and data cables are correctly connected Ö How Check that the drive's power and data cables are correctly connected at both ends (floppy drive and system board). Refer to page 59 for connections to the floppy drive and page 57 for connections to the system board. 26