HP Brio ba410 hp brio ba410, user guide - Page 62
Removing and Replacing the Front Panel
View all HP Brio ba410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Accessing Internal Components Removing and Replacing the Front Panel To Remove the Front Panel Note You must first remove the main cover before removing the front panel. 1 Standing in front of the PC, pull open the three plastic clips to the left side of the panel until the panel begins to come off. 2 Tilt the panel round slightly and carefully lift it off. 3 Lay the front panel on a flat surface beside the PC. To Replace the Front Panel 1 Standing in front of the PC, engage the 3 plastic positioning tabs in the holes to the right of the front panel. 2 Tilt the panel round so that it snaps into place on the other side. 54
Accessing Internal Components
54
Removing and Replacing the Front Panel
To Remove the Front Panel
Note
You must first remove the main cover before removing the front panel.
1
Standing in front of the PC, pull open the three plastic clips to the left
side of the panel until the panel begins to come off.
2
Tilt the panel round slightly and carefully lift it off.
3
Lay the front panel on a flat surface beside the PC.
To Replace the Front Panel
1
Standing in front of the PC, engage the 3 plastic positioning tabs in the
holes to the right of the front panel.
2
Tilt the panel round so that it snaps into place on the other side.