HP Brio ba410 hp brio ba410, user guide - Page 74
Installing an Expansion Card
View all HP Brio ba410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Installing an Expansion Card Installing an Expansion Card 1 Switch off the PC. 2 Remove the PC's main cover. Refer to page 49. 3 Lay the PC on its side. 4 Press down on the clip on the card retention mechanism until it comes loose and lift it out. 5 Locate the slot you want to use. • If fitting a card in an empty slot, remove the slot cover. • If replacing a card in an expansion slot, disconnect it from the slot and slide it out. 6 Aligning the new card carefully, press it firmly into the socket. 7 Replace the card retention mechanism by pressing on its flat edge until it clips back into place. 8 Replace the PC's main cover. Refer to page 49. 66
Installing an Expansion Card
66
Installing an Expansion Card
1
Switch off the PC.
2
Remove the PC’s main cover. Refer to page 49.
3
Lay the PC on its side.
4
Press down on the clip on the card retention mechanism until it comes
loose and lift it out.
5
Locate the slot you want to use.
•
If fitting a card in an empty slot, remove the slot cover.
•
If replacing a card in an expansion slot, disconnect it from the slot
and slide it out.
6
Aligning the new card carefully, press it firmly into the socket.
7
Replace the card retention mechanism by pressing on its flat edge until
it clips back into place.
8
Replace the PC’s main cover. Refer to page 49.