HP Brio ba410 hp brio ba410, user guide - Page 73

Installing a Memory Module

Get HP Brio ba410 PDF manuals and user guides View all HP Brio ba410 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 73 highlights

Installing a Memory Module Installing a Memory Module 1 Switch off the PC. 2 Remove the PC's main cover. Refer to page 49. 3 Lay the PC on its side so you can more easily reach in to access the system board. 4 Remove the power supply unit to gain better access to the inside of the PC (refer to page 51). Position of memory modules 5 Either remove the module you want to replace or locate an empty memory module socket. 6 Make sure that the socket's clips are open. 7 Align the grooves on the bottom of the module with the corresponding marks on the socket and push it firmly into place. The clips close automatically. 8 Replace the power supply unit. 9 Replace the main cover. Refer to page 54. 65

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
Installing a Memory Module
65
Installing a Memory Module
1
Switch off the PC.
2
Remove the PC’s main cover. Refer to page 49.
3
Lay the PC on its side so you can more easily reach in to access the
system board.
4
Remove the power supply unit to gain better access to the inside of the
PC (refer to page 51).
5
Either remove the module you want to replace or locate an empty
memory module socket.
6
Make sure that the socket’s clips are open.
7
Align the grooves on the bottom of the module with the corresponding
marks on the socket and push it firmly into place. The clips close
automatically.
8
Replace the power supply unit.
9
Replace the main cover. Refer to page 54.
Position of memory
modules