HP Brio ba410 hp brio ba410, user guide - Page 83
to enter
View all HP Brio ba410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Clearing Your PC's CMOS (BIOS) Settings Switch Switch function: 1 CMOS OFF = normal (default) ON = clear CMOS and reload default values in Setup 2 Password OFF = enabled (default) ON = disabled/clear User and Administrator passwords 3 Reserved OFF = default 4 Reserved OFF = default 2 Change the position of switch 1 to ON to clear both CMOS and passwords. If you want to clear passwords only, set switch 2 to ON. Note that other BIOS settings will remain unchanged. 3 Replace the main cover and reconnect the power cord. 4 Switch on the PC and wait for the message "settings have been cleared" to appear. 5 Shut down the PC, remove the cover and power cord and set switch 1 to OFF. Set switch 2 to OFF if you have been resetting passwords only. 6 Restart the PC and press F2 to enter the Setup program when prompted. You now have full access to the Setup program. For more information on Setup, refer to page 72. 75