HP Brocade 8/24c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 129

AG-1028 2 AG-1028 Message , [AG-1028], ,, WARNING, , Device with Port WWN tried to perform fabric login through port , without having access permission. Probable Cause Indicates the device does not have login access for that port, as per Advanced Device Security (ADS) policy set by the user. Recommended Add the device to the ADS allow list for the specified port using the ag --adsadd command. Action Severity WARNING AG-1029 Message , [AG-1029], ,, WARNING, , Port Group has ports going to different fabrics. Probable Cause Indicates a misconfiguration. Recommended Connect all ports in the port group to the same fabric. Action Severity WARNING AG-1030 Message , [AG-1030], ,, WARNING, , N_Port ID: has been determined to be unreliable. Probable Cause Indicates that the port goes online and offline often and therefore the port is marked as unreliable. After a certain interval of time, if the port toggling remains within the threshold limit, the port will be marked as reliable. Recommended No action is required. Action Severity WARNING AG-1031 Message Probable Cause , [AG-1031], ,, WARNING, , Loop Detected for device with Port WWN connected to port Indicates that the routing loop is detected for the device connected to the port. Fabric OS Message Reference 43 53-1002448-01