HP Brocade 8/24c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 377

FICN-1040 38 FICN-1040 Message , [FICN-1040], ,, ERROR, , HostTapeEgr:Tape:CmdReject Sense Data Rcvd:Path= LastCmds=0x SenseData:Bytes0-0xB=0x . Probable Cause Indicates an active disk emulation device received a FICON Purge Path from the channel. Recommended If there was an unexpected job failure or IO Error associated with this event, contact your switch Action service provider. Severity ERROR FICN-1041 Message , [FICN-1041], ,, ERROR, , HostTapeEgr:AS Link Level Reject (LRJ) from CU Rx Path= LastCmd=0x LastStatus=0x. Probable Cause Indicates an LRJ received from a device indicates that the CU has lost the logical path to the LPAR. Recommended If this was an unexpected event, contact your vendor's customer support for assistance. Action Severity ERROR FICN-1042 Message , [FICN-1042], ,, WARNING, , HostTapeIng:FICON Cancel received Path= state=0x. Probable Cause Indicates a job was cancelled during a write pipelining. Recommended If this was an unexpected event (cancel is normally an operator event), contact your vendor's Action customer support for assistance. Severity WARNING Fabric OS Message Reference 291 53-1002448-01