HP Brocade 8/24c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 137

ANV System Messages Chapter 4 ANV-1001 Message , [ANV-1001], ,, ERROR, , Port port fault. Change the SFP or check the cable. Probable Cause Indicates a deteriorated small form-factor pluggable (SFP), an incompatible SFP pair, or a faulty cable between the peer ports. Recommended Verify that compatible SFPs are used on the peer ports, the SFPs have not deteriorated, and the Action fibre channel cable is not faulty. Replace the SFPs or the cable, if necessary. Severity ERROR ANV-1002 Message , [ANV-1002], , FFDC, ERROR, , Port chip faulted due to an internal error. Probable Cause Indicates an internal error. All the ports on the chip will be disrupted. Recommended To recover a bladed system, execute the slotPowerOff and slotPowerOn commands on the blade. To Action recover a non-bladed system, execute the fastBoot command on the switch. Severity ERROR ANV-1003 Message , [ANV-1003], ,, CRITICAL, , S,C: HW ASIC Chip error. Type = 0x, Error = . Probable Cause Indicates an internal error in the application-specific integrated circuit (ASIC) hardware that may degrade the data traffic. Recommended Restart the system at the next maintenance window. If the problem persists, replace the faulted Action blade. Severity CRITICAL Fabric OS Message Reference 51 53-1002448-01