HP Brocade 8/24c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 422

43 FSS-1004 If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. Severity WARNING FSS-1004 Message , [FSS-1004], ,, ERROR, , Memory shortage. Probable Cause Indicates that the system ran out of memory. Recommended Action Execute the memShow command to view memory usage in the switch. For dual CP system, enable the HA state synchronization using the haSyncStart command. For nonbladed systems, restart the switch using the reBoot command. If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. Severity ERROR FSS-1005 Message , [FSS-1005], ,, WARNING, , FSS read failure. Probable Cause Indicates that the read system call to the FSS device has failed. Recommended If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP Action transfers; then execute the supportSave command and contact your switch service provider. Severity WARNING FSS-1006 Message , [FSS-1006], ,, WARNING, , No FSS message available. Probable Cause Indicates that data is not available on the FSS device. Recommended If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP Action transfers; then execute the supportSave command and contact your switch service provider. Severity WARNING 336 Fabric OS Message Reference 53-1002448-01