HP Brocade 8/24c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 842

115 ZONE-1013 ZONE-1013 Message , [ZONE-1013], ,, WARNING, , QuickLoop not supported. Probable Cause Indicates that the QuickLoop feature is not supported in the current version of Fabric OS. QuickLoop zones are not supported in Fabric OS version 4.x or later. Even if the QuickLoop zoning configuration is enabled on the switch, it will not be supported. Recommended Edit the zone database to remove the QuickLoop zoning definition in the effective configuration. Action Severity WARNING ZONE-1014 Message , [ZONE-1014], ,, ERROR, , Missing required license - . Probable Cause Indicates that the required zoning license is missing. Recommended Install the zoning license using the licenseAdd command. Contact your switch supplier to obtain a Action zoning license if you do not have one. Severity ERROR ZONE-1015 Message , [ZONE-1015], ,, WARNING, , Not owner of the current transaction . Probable Cause Indicates that a zoning change operation is not allowed because the zoning transaction is opened by another task. Indicates concurrent modification of the zone database by multiple administrators. Recommended Wait until the previous transaction is completed. Verify that only one administrator is working with Action the zone database at a time. Severity WARNING ZONE-1017 Message Probable Cause , [ZONE-1017], ,, ERROR, , FA Zone() contains incorrect number of Initiator and Target devices. Indicates that the fabric assist (FA) zoning configuration has more than one initiator. This is because of incorrect entries in the FA zoning configuration. 756 Fabric OS Message Reference 53-1002448-01