HP Brocade 8/24c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 347

FCR-1029 37 FCR-1029 Message , [FCR-1029], ,, INFO, , In slot port WWN pool 95 percent allocated. Probable Cause Indicates that the Port world wide name (WWN) pool has rolled over in the specified slot, and WWN entries detected not in use are reused as needed. Recommended Action It is unlikely that WWN conflicts will occur as a result of pool rollover unless the switch is deployed in a very large MetaSAN environment with large number of logical storage area network (LSAN) devices and fabrics, or there are highly dynamic changes to EX_Port connectivity. WWN conflicts might cause unpredictable behavior in management applications. To avoid WWN conflicts, all EX_Ports attached to fabrics with highly dynamic changes to EX_Port connectivity should be disabled and then re-enabled. Severity INFO FCR-1030 Message , [FCR-1030], ,, INFO, , Physical device came online at fabric . Probable Cause Indicates that the physical device world wide name (WWN) came online in the specified fabric. Recommended No action is required. Action Severity INFO FCR-1031 Message , [FCR-1031], ,, INFO, , Physical device went offline in fabric . Probable Cause Indicates that the physical device world wide name (WWN) went offline in the specified fabric. Recommended No action is required. Action Severity INFO FCR-1032 Message Probable Cause , [FCR-1032], ,, INFO, , Edge fabric enabled security on port in fabric . Indicates that Secure mode was turned on in the edge fabric. Fabric OS Message Reference 261 53-1002448-01