HP Brocade 8/24c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 308

29 FABR-1047 FABR-1047 Message , [FABR-1047], , INFO, , Area unavailable to assign to the port. Persistently disabling port . Probable Cause Indicates that there are no areas available to assign to the port during port creation. Recommended Move some ports out of the default switch to make areas available. Action Severity INFO FABR-1048 Message , [FABR-1048], ,, ERROR, , Detected Fabric ID (FID inherited) conflict with switch (domain , FID ). Probable Cause Indicates that a switch in the fabric has a Fabric ID conflict with the inherited FID of the local switch. Recommended Make sure that all the switches in the fabric have same Fabric ID or upgrade the switch firmware to Action a VF-capable firmware. Severity ERROR FABR-1049 Message , [FABR-1049], ,, ERROR, , Detected Fabric ID (FID inherited) conflict with neighbor switch (domain , FID ). E-ports () connected to the switch are disabled. Probable Cause Indicates that the neighbor switch has Fabric ID conflict with the inherited FID of the local switch. All E_ports directly connected to the conflicting switch are disabled. Recommended Make sure that all the switches in the fabric have same Fabric ID or upgrade the switch firmware to Action a VF-capable firmware. Severity ERROR FABR-1050 Message Probable Cause , [FABR-1050], ,, INFO, , license not present. F-port trunking cannnot be enabled on port(). Indicates that the Trunking or SAO license is not installed. 222 Fabric OS Message Reference 53-1002448-01