HP Brocade 8/24c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 185

C2-1009 11 C2-1009 Message Message , [C2-1009], ,, WARNING, , S,P(): portcfglongdistance vc_translation_link_init = 1 overwrites fill word IDLE. ARB will be used on the link. Probable Cause Indicates portcfglongdistance vc_translation_link_init 1 overwrites fill word IDLE. ARB will be used on the link. Recommended No action is required. Action Severity WARNING C2-1010 Message Message , [C2-1010], ,, CRITICAL, , S, C: Internal monitoring has identified suspect hardware, blade may need to be reset or replaced: fault1:, fault2: th2:0x. Probable Cause Indicates above normal errors observed in hardware that may or may not impact data traffic. Recommended Whenever this error is observed persistently, power cycle the specified blade. If the problem Action persists, replace the blade. Severity CRITICAL C2-1012 Message Message , [C2-1012], ,, WARNING, , S,P(): Link Timeout on internal port ftx= tov= (>) vc_no= crd(s)lost= complete_loss:. Probable Cause Indicates that one or more credits have been lost on a back-end port, and there is no traffic on that port for two seconds. Recommended Turn on the back-end credit recovery to reset the link and recover the lost credits. If credit recovery Action has already been turned on, the link will be reset to recover the credits and no action is required. Severity WARNING Fabric OS Message Reference 99 53-1002448-01