HP Brocade 8/24c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 250

22 CVLM-1004 CVLM-1004 Message , [CVLM-1004], ,, WARNING, , Crypto device configuration between local switch () and peer () is out of sync. New encryption session is not allowed. Probable Cause Indicates that EE nodes in the cluster encryption group have different configurations. Recommended Synchronize the configuration in the cluster group using the cryptocfg --commit command. Refer to Action the Fabric OS Command Reference Manual for more information on this command. Severity WARNING CVLM-1005 Message , [CVLM-1005], ,, INFO, , Crypto service is on the switch. Probable Cause Indicates that Crypto service is enabled or disabled on the switch. Recommended No action is required. Action Severity INFO CVLM-1006 Message , [CVLM-1006], ,, WARNING, , Crypto device in target container is not in AD0. Probable Cause Recommended Action Indicates that the crypto device in the crypto target container is not in AD0. Use the ad command to move the crypto device into AD0. Refer to the Fabric OS Command Reference Manual for more information on this command. Severity WARNING CVLM-1007 Message , [CVLM-1007], ,, WARNING, , Redirect zone update failure. Status is . Probable Cause Recommended Action Indicates that the redirect zone update has failed. Issue the cryptocfg --commit command again. Refer to the Fabric OS Command Reference Manual for more information on this command. Severity WARNING 164 Fabric OS Message Reference 53-1002448-01