HP Brocade 8/24c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 398

38 FICN-1105 FICN-1105 Message , [FICN-1105], ,, WARNING, , DevTeraIng:LRJ received on Path=0x lastCmds=0x lastStatus=0x treating as system reset event. Probable Cause Indicates an LRJ from a FICON channel indicates that the channel does not have a path established to the CU. Recommended This is normally an unexpected event; contact your vendor's customer support for assistance. Action Severity WARNING FICN-1106 Message , [FICN-1106], ,, ERROR, , DevPrintEgr:AS Link Level Reject (LRJ) from Chan on Path=0x% LastCmd=0x LastStatus=0x. Probable Cause Indicates the FICON channel indicated in the path issued an LRJ frame for a sequence from the device. Recommended If there was a job failure associated with this event, contact your vendor's customer support for Action assistance. Severity ERROR FICN-1107 Message , [FICN-1107], ,, WARNING, , DevPrintEgr:FICON Cancel received Path=0x state=0x tflags=0x sflags=0x. Probable Cause Indicates the FICON channel issued a Cancel sequence for a device in emulation. Recommended If there was an unexpected job failure associated with this event, contact your vendor's customer Action support for assistance. Severity WARNING 312 Fabric OS Message Reference 53-1002448-01