HP Brocade 8/24c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 202

15 CDR-1004 CDR-1004 Message , [CDR-1004], , ERROR, , S, C: Invalid DMA ch pointer, chan:, good_addr:0x, bad_addr:0x. Probable Cause Indicates an internal error in the Application Specific Integrated Circuit (ASIC) hardware that may degrade data traffic. Recommended Whenever this error occurs, restart the system at the next maintenance window. If the problem Action persists, replace the blade. Severity ERROR CDR-1005 Message , [CDR-1005], ,, WARNING, , S, P(): best effort QOS will be turned off at next port state change as it is not supported under this configuration. Probable Cause Indicates QoS will be turned off automatically at the next port state change because best effort is no longer supported on a 4G platform or 8G platform long distance port. Recommended No action is required. Action Severity WARNING CDR-1006 Message , [CDR-1006], ,, WARNING, , S, P(): QOS overwrites portcfglongdistance vc_translation_link_init. ARB will be used on the link. Probable Cause Indicates QoS overwrites the portcfglongdistance vc_translation_link_init 0 choice. ARB will be used on the link. Recommended No action is required. Action Severity WARNING CDR-1007 Message Probable Cause , [CDR-1007], ,, WARNING, , S,C: Internal link errors have been reported, no hardware faults identified, continuing to monitor for errors: flt1:, flt2: thresh1:0x. Indicates some errors found in hardware that may or may not impact data traffic. 116 Fabric OS Message Reference 53-1002448-01