HP Brocade 8/24c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 472

45 FW-1342 FW-1342 Message , [FW-1342], ,, WARNING, , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of login violations has risen above the high boundary. Login violations indicate that a login failure has been detected. Recommended Action Execute the errShow command to determine the IP location of the login attempt. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies. Severity WARNING FW-1343 Message , [FW-1343], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the number of login violations has changed from a value outside of the acceptable range to a value within the acceptable range. Login violations indicate that a login failure has been detected. Recommended No action is required. Action Severity INFO FW-1349 Message , [FW-1349], ,, INFO, , , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of invalid signatures has fallen below the low boundary. Invalid-signature violations indicate that a packet with an invalid signature has been received from the primary fabric configuration server (FCS). When the FCS downloads a new configuration to the other switches in the fabric, the packet is signed using the private key of the primary FCS. The receiving switch has to verify this signature with the public key of the primary FCS switch. If verification fails, it rejects the packet. This counter keeps track of the number of packets received with invalid signatures. Recommended No action is required. Action Severity INFO 386 Fabric OS Message Reference 53-1002448-01