HP Brocade 8/24c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 581

Chapter LSDB System Messages 68 LSDB-1001 Message Probable Cause , [LSDB-1001], ,, ERROR, , Link State ID out of range. Indicates the specified link state database ID is out of the acceptable range. The valid link state ID is the same as the valid domain ID, whose range is from 1 through 239. The switch will discard the record because it is not supported. Recommended No action is required. Action Severity ERROR LSDB-1002 Message , [LSDB-1002], ,, INFO, , Local Link State Record reached max incarnation# Probable Cause Indicates the local link state database reached the maximum incarnations. An "incarnation" is a progressive number that identifies the most recent version of the LSR (link state record). The switch generates its local link state record when first enabled. The incarnation number will begin again at 0x80000001 after reaching 0x7FFFFFFF. Recommended No action is required. Action Severity INFO LSDB-1003 Message Probable Cause , [LSDB-1003], , FFDC, CRITICAL, , No database entry for local Link State Record, domain . Indicates there is no local link state record entry in the link state database. The switch should always generate its own local entry when starting up. An "incarnation" is a progressive number that identifies the most recent version of the LSR (link state record). The switch generates its local link state record when first enabled. By disabling and enabling the switch, a new local link state record is generated. Fabric OS Message Reference 495 53-1002448-01