HP Brocade 8/24c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 360

37 FCR-1081 FCR-1081 Message , [FCR-1081], ,, WARNING, , The pause message is rejected by the domain . Probable Cause Indicates that during the Coordinated HotCode protocol, a switch in the fabric has rejected the pause message which prevented the protocol from completing. Any data traffic disruption observed during the firmware download may have been due to the rejected pause message. Recommended No action is required. Action Severity WARNING FCR-1082 Message , [FCR-1082], ,, WARNING, , The pause retry count is exhausted for the domain . Probable Cause Indicates that during the Coordinated HotCode protocol, a switch in the fabric did not accept the pause message which prevented the protocol from completing. Any data traffic disruption observed during the firmware download may have been due to this issue. Recommended No action is required. Action Severity WARNING FCR-1083 Message , [FCR-1083], ,, WARNING, , The resume message is rejected by the domain . Probable Cause Indicates that during the Coordinated HotCode protocol, a switch in the fabric has rejected the pause message which prevented the protocol from completing. Any data traffic disruption observed during the firmware download may have been due to the rejected resume message. Recommended No action is required. Action Severity WARNING FCR-1084 Message Probable Cause , [FCR-1084], ,, WARNING, , The resume retry count is exhausted for the domain . Indicates that during the Coordinated HotCode protocol, a switch in the fabric did not accept the resume message which prevented the protocol from completing. Any data traffic disruption observed during the firmware download may have been due to this issue. 274 Fabric OS Message Reference 53-1002448-01