HP Brocade 8/24c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 164

7 BL-1021 BL-1021 Message , [BL-1021], ,, INFO, , Retry , internal port retry initialization, . Probable Cause Indicates that the switch had internal ports not online and that the system is retrying to bring the ports that failed back online. Recommended No action is required. Action Severity INFO BL-1022 Message , [BL-1022], ,, CRITICAL, , Init Failed: Switch DISABLED because internal ports were not ONLINE, . Probable Cause Indicates that the switch initiation failed because one or more of the internal ports was not online. The switch is faulted. Recommended Action Restart or power cycle the switch. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. Refer to the Fabric OS Command Reference for more information on these commands. Additional fault messages precede and follow this error, providing more information. See other error messages for recommended action. If the message persists, replace the switch. Severity CRITICAL BL-1023 Message , [BL-1023], ,, CRITICAL, , Blade in slot was reset before blade init completed. As a result the blade is faulted. Probable Cause Indicates that the blade was reset before the initialization completed. Recommended Action Restart or power cycle the blade. If the message persists, replace the blade. Severity CRITICAL 78 Fabric OS Message Reference 53-1002448-01