HP Brocade 8/24c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 134

3 AN-1004 AN-1004 Message , [AN-1004], ,, WARNING, , Congestion bottleneck on port /. pct. of secs. affected. Probable Cause Indicates that the volume of outgoing traffic at this port is too high for the capacity of the link. Recommended Add more capacity on the path, using trunk links if possible. Action Severity WARNING AN-1005 Message , [AN-1005], ,, INFO, , Slot , port has bottleneck cleared. Probable Cause Indicates that the bottleneck was cleared on the port. Recommended No action is required. Action Severity INFO AN-1010 Message , [AN-1010], ,, WARNING, , Severe latency bottleneck detected at Slot port . Probable Cause Indicates credit loss at the specified port, a downstream port, or a very high latency device at the edge of the fabric. Recommended Contact your vendor's customer support for assistance. Action Severity WARNING AN-1011 Message Probable Cause , [AN-1011], ,, WARNING, , Could not distinguish between primary and dependent severe latency bottleneck on slot port because port mirroring is enabled on this port. Indicates that resources needed to determine whether there is complete credit loss on a VC at this port are in use by port mirroring. 48 Fabric OS Message Reference 53-1002448-01