HP Brocade 8/24c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 192

12 C3-1013 C3-1013 Message , [C3-1013], ,, INFO, , Maximum wait cycles to recover the lost frame or credit is exceeded on the internal Port Slot ,P() m_rdy(0x)/m_frame(0x). Probable Cause Indicates that wait cycles to recover the lost frame or credit is exceeded on the specified port. Recommended Turn on the back-end credit recovery to reset the link and recover the lost credits. If credit recovery Action has already been turned on, the link will be reset to recover the credits and no action is required. Severity INFO C3-1014 Message , [C3-1014], ,, WARNING, , Link Reset on internal Port S,P() vc_no= crd(s)lost=. Probable Cause Indicates that one or more credits are lost and the link is reset. Recommended Whenever this error is observed persistently, power cycle the specified blade. If the problem Action persists, replace the blade. Severity WARNING C3-1015 Message , [C3-1015], ,, WARNING, , Port re-initialized due to Link Reset failure on internal Port S,P(). Probable Cause Indicates that the port is re-initialized due to Link Reset failure. Recommended Whenever this error is observed persistently, power cycle the specified blade. If the problem Action persists, replace the blade. Severity WARNING C3-1016 Message Probable Cause , [C3-1016], ,, ERROR, , Port is faulted due to port re-initialization failure on internal Port S,P() with reason . Indicates that the port failed due to port re-initialization failure. 106 Fabric OS Message Reference 53-1002448-01