HP Brocade 8/24c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 441

FW-1127 45 • Domain conflicts. • Segmentation of the principal link between two switches. • Incompatible link parameters. During E_Port initialization, ports exchange link parameters. Rarely, incompatible parameters result in segmentation. A low number of segmentation errors means that the fabric is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1127 Message , [FW-1127], ,, INFO, , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of segmentations has risen above the high boundary. Segmentation changes might occur due to the following reasons: • Zone conflicts. • Domain conflicts. • Segmentation of the principal link between two switches. • Incompatible link parameters. During E_Port initialization, ports exchange link parameters. Rarely, incompatible parameters result in segmentation. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1128 Message Probable Cause , [FW-1128], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Indicates that the number of segmentations has changed from a value outside of the acceptable range to a value within the acceptable range. Segmentation changes might occur due to the following reasons: • Zone conflicts. • Domain conflicts. • Segmentation of the principal link between two switches. • Incompatible link parameters. During E_Port initialization, ports exchange link parameters. Rarely, incompatible parameters result in segmentation. Fabric OS Message Reference 355 53-1002448-01