HP Brocade 8/24c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 307

FABR-1044 29 FABR-1044 Message , [FABR-1044], , ERROR, , Detected Fabric ID conflict with neighbor switch (domain ), FID . E-ports () connected to the switch are disabled. Probable Cause Indicates that the neighbor switch has a Fabric ID conflict with the local switch. All E_ports directly connected to the conflicting switch are disabled. Recommended Make sure that all the switches in the fabric have the same fabric ID or upgrade the switch Action firmware to a VF-capable firmware. Severity ERROR FABR-1045 Message , [FABR-1045], , ERROR, , Detected Base Switch conflict with remote (not neighbor) switch (domain ), BS . No local E-ports disabled. Probable Cause Indicates that the remote switch has a Base Switch attribute conflict with the local switch. But no ports are disabled because the remote switch is not adjacent to the local switch. Recommended Make sure that all the switches in the fabric have the same Base Switch attribute or disable VF Action mode for the conflicting switch using the fosconfig command. Severity ERROR FABR-1046 Message , [FABR-1046], , ERROR, , Detected Base Switch conflict with neighbor switch (domain ), BS . E-ports () connected to the switch are disabled. Probable Cause Indicates that the remote switch has a Base Switch attribute conflict with the local switch. All the E_ports directly connected to the conflicting switch are disabled. Recommended Make sure that all the switches in the fabric have the same Base Switch attribute or upgrade the Action switch firmware to a VF-capable firmware. Severity ERROR Fabric OS Message Reference 221 53-1002448-01