HP Brocade 8/24c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 810

106 TRCE-1010 TRCE-1010 Message , [TRCE-1010], ,, ERROR, , Traced fails to start Probable Cause Indicates that the trace daemon (traced), used for transferring trace files, failed to start. The trace capability within the switch is unaffected. The traced facility is normally restarted automatically by the system after a brief delay. Recommended Action If the message persists, restart the CP (dual-CP system) or restart the switch. Run the supportFtp command to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR TRCE-1011 Message , [TRCE-1011], ,, INFO, , Trace dump manually transferred to target ' ': . Probable Cause Indicates that a manual transfer of trace dump files has occurred. Recommended No action is required. Action Severity INFO TRCE-1012 Message , [TRCE-1012], ,, WARNING, , The system was unable to retrieve trace information from slot . Probable Cause Indicates that communication between the main system and the indicated slot is unavailable. Recommended Make sure the blade is enabled and retry the command. If the blade is already enabled, run the Action supportSave command and contact your switch service provider. Severity WARNING 724 Fabric OS Message Reference 53-1002448-01