HP Brocade 8/24c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 706

94 SEC-1188 SEC-1188 Message , [SEC-1188], ,, INFO, , Security violation: Unauthorized device tries to FLOGI to index/area of switch . Probable Cause Indicates a device connection control (DCC) security violation was reported. The specified device attempted to login using fabric login (FLOGI) to an unauthorized port. The DCC policy correlates specific devices to specific port locations. If the device changes connected port, the device will not be allowed to login. Recommended Action Check the DCC policy and verify the specified device is allowed in the fabric and is included in the DCC policy. If the specified device is not included in the policy, add it to the policy. If the host is not allowed access to the fabric, this is a valid violation message and an unauthorized entity is trying to access your fabric. Take appropriate action, as defined by your enterprise security policy. Severity INFO SEC-1189 Message , [SEC-1189], ,, INFO, , Security violation: Unauthorized host with IP address tries to do SNMP write operation. Probable Cause Indicates an SNMP security violation was reported. The specified unauthorized host attempted to perform a write SNMP operation. Recommended Action Check the WSNMP policy and verify which hosts are allowed access to the fabric through SNMP. If the host is allowed access to the fabric but is not included in the policy, add the host to the policy. If the host is not allowed access to the fabric, this is a valid violation message and an unauthorized entity is trying to access your fabric. Take appropriate action, as defined by your enterprise security policy. Severity INFO SEC-1190 Message , [SEC-1190], ,, INFO, , Security violation: Unauthorized host with IP address tries to do SNMP read operation. Probable Cause Indicates an SNMP security violation was reported. The specified unauthorized host attempted to perform a read SNMP operation. Recommended Action Check the RSNMP policy to verify the hosts allowed access to the fabric through SNMP read operations are included in the RSNMP policy. If the host is allowed access but is not included in the RSNMP policy, add the host to the policy. If the host is not allowed access to the fabric, this is a valid violation message and an unauthorized entity is trying to access your fabric. Take appropriate action, as defined by your enterprise security policy. Severity INFO 620 Fabric OS Message Reference 53-1002448-01