HP ElitePad 1000 HP ElitePad 1000 G2 Maintenance and Service Guide - Page 43
to which the TouchScreen cable is attached, Release the zero insertion force ZIF connector
View all HP ElitePad 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
12. Open the retention gate (2). 13. Slide the tablet out of the service tool (3). 14. Disconnect the suction cup handles (1). 15. Lower the suction cup handle (2). 16. Remove the suction cup (3). 17. Slide the display assembly (1) to the left until the display assembly cables and connectors are accessible. 18. Release the zero insertion force (ZIF) connector (2) to which the TouchScreen cable is attached, and then disconnect the TouchScreen cable (3) from the system board. Tablet component replacement procedures 35
12.
Open the retention gate
(2)
.
13.
Slide the tablet out of the service tool
(3)
.
14.
Disconnect the suction cup handles
(1)
.
15.
Lower the suction cup handle
(2)
.
16.
Remove the suction cup
(3)
.
17.
Slide the display assembly
(1)
to the left until the display assembly cables and connectors
are accessible.
18.
Release the zero insertion force (ZIF) connector
(2)
to which the TouchScreen cable is attached,
and then disconnect the TouchScreen cable
(3)
from the system board.
Tablet component replacement procedures
35